1:35 Soviet BT-2 - Hobby Boss

The masking set for the road wheels of the Soviet BT-2 fast tank in 1:35 scale is cut for the kit from Hobby Boss and serves to separate the rubber tire band from the rim cleanly.

Scale1:35
Manufacturer Quickwheel
Product EAN8591111000000

Responsibility details are not available.

7.56 €
6.25 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

BT-2 road wheel masks in 1:35 scale

A pre-cut masking set for painting the wheels of the BT-2 tank. It covers the rubber tire band, so you can spray the rim in the base color of the vehicle and the tire band stays in the dark shade of rubber. The set is cut for the BT-2 kit from Hobby Boss — the diameters and shapes match the parts from that kit and need not fit wheels from another one.

What makes the running gear of the BT-2 special

The BT-2 stands on Christie suspension and its running gear is therefore very different from German machines of the same era. There are only four large road wheels with a strikingly wide rubber tire band on each side and no return rollers between them. The wheels are not covered by anything and the upper run of the track bears directly on them. The design allowed for road running without tracks, with the rear pair of wheels driving and the front pair steering, so the wheels are sturdy and their tire band is genuinely wide. For the modeler that means four large, clearly visible surfaces per side, where the border between rim and rubber is long and every hesitation of the hand is apparent at first glance. That is precisely why masking pays off on the BT-2 rather than lining the tire band with a brush.

When a mask will not hold or the paint bleeds

The wheel of the BT-2 has a domed center, so a mask does not have an entirely flat surface. Lay it on dry, check the centering and only then press it down with a toothpick or a skewer from the center outwards — that drives out the air which would otherwise stay under the edge and make a path for the paint. Bleeding is most often caused by grease from your fingers: wash the parts in lukewarm water with dish soap before masking and let them dry. A proven trick against a bleeding edge is to spray a very thin coat of the color the tire band is to have over the mask once it is on; any penetration then sinks into its own shade and only afterwards do you spray the rim color.

Who the set is for

  • Builders of interwar Soviet equipment in 1:35 scale
  • Modelers who cannot line a tire band into a clean circle with a brush
  • Those who want to shorten the time spent on a running gear
  • Beginners who are just starting out with masking wheels

Paints, glue and the kit are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The set is cut for the BT-2 kit from Hobby Boss. The wheels of other kits tend to have a different diameter and center shape, so always check the match before ordering.

The BT-2 has only four large wheels with a wide rubber tire band on each side and no return rollers. The surfaces are large and entirely exposed, so an imprecisely lined border is immediately visible.

The commonest causes are grease and too heavy a first coat. Degrease the parts, press the mask down from the center outwards and lay the first spray on square and thinly. A small penetration can be repaired afterwards with a brush.

Best shortly after the paint has flashed off, not once it has fully cured. Pull it away slowly and at a shallow angle to the surface, so it does not tear the finish.

Last seen

QuickwheelQW-2571:35

1:35 Soviet BT-2 - Hobby Boss

The masking set for the road wheels of the Soviet BT-2 fast tank in 1:35 scale is cut for the kit from Hobby Boss and serves to separate the rubber tire band from the rim cleanly.
In stock
7.56 €
FujimiFU092161:24

1:24 Ultra Seven TDF PO-I Pointer

A plastic kit of the Pointer car from the series Ultra Seven in 1:24 scale from the Japanese manufacturer Fujimi. The model is supplied unassembled and unpainted.
In stock
44.36 €
CMKCMK40121:48

1:48 Hurricane Mk.II - control surfaces set for HAS

CMK Hurricane Mk.II, a movable control surfaces set 1:48 is a resin detail set with replacement rudders and flaps for the British fighter.
In stock
8.76 €
BANON DESIGNBAN004-09

BAN004 torx cone head 0,9mm

Screw heads of cone shape with a star recess, 0.9 mm in diameter, a medium to coarser step for the loaded joints of a scaled-down model.
In stock
10.36 €
PolákPOL5738

Barva patina - Šedá tmavá 50ml

A modeling patina paint from Polak in a dark gray shade, a 50 ml package. Suitable for weathering and realistic aging effects on models and dioramas.
In stock
2.36 €
1:12  NIU E-SCOOTER N1S - Pre-Painted (white version)-25 %Stock ClearanceFavorite
TrumpeterTR073051:12

1:12 NIU E-SCOOTER N1S - Pre-Painted (white version)

Trumpeter 1:12 NIU E-Scooter N1S (white version) is a pre-painted plastic kit of a modern electric scooter.
5 leftof 6
20.76 €15.56 € You save 5.20 €
Aires/QuickboostQB486981:48

1:48 P-40 Warhawk gun barrels

Resin machine gun barrels for the P-40 Warhawk in 1:48 scale from Quickboost. Accurate barrels with drilled muzzles; it is not an airplane model.
In stock
4.76 €
EduardED6340481:24

1:24 Supermarine Spitfire Mk.VIII LooK

The instrument panel of the Spitfire Mk.VIII in 1:24, the LööK range is an Eduard accessory for modelers building the large British fighter.
In stock
10.40 €
AiresAIR41671:48

1:48 A-1H Skyraider cockpit set

A resin detail set, the A-1H Skyraider cockpit in 1:48 scale from Aires. A replacement cockpit for experienced modelers; it is not an aircraft model.
In stock
16.80 €
PlusmodelPMOAL40821:48

1:48 Pilot F4U Corsair

Pilot F4U Corsair is a resin figure of an American naval pilot of the Second World War in 1:48 scale from the Czech manufacturer Plusmodel.
In stock
9.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.