SPz Marder 1A3 wheel masks in 1:35 scale from Quickwheel for the clean separation of the rubber tire from the disk on the wheels of the kit from Revell.
Responsibility details are not available.
A masking accessory for painting road wheels, not a kit. The set gives the boundary between the rubber tire and the disk a ready-made shape, so the cutting of rings and the drawing around with a brush both fall away.
The set is cut for the wheels of the kit of this infantry fighting vehicle from Revell. Wheel masks are always tied to a particular kit, because the diameter of a wheel and the shape of the disk differ between manufacturers.
Not every disk is a smooth area. There tend to be raised nuts, hub bosses, pressings or a rim around the perimeter on it, and a mask laid on flat then need not adhere around the whole perimeter – it is exactly over relief that the paint most easily gets under the margin. There are several solutions and they complement each other well.
The simplest is to press the mask down properly once it is in place: go over the whole margin with a skewer, a toothpick or a burnisher and pay attention to the places where it passes over a raised detail. The second step is insurance against running under – spray the edge with a thin layer of the color that is under the mask. If something runs under, the same shade will run under and the edge will stay clean; only then apply the second color. If a mask does not seat over a pronounced boss at all, you can carefully make a short notch in it, so that it can open out and flow around the obstacle. And where the disk is set off from the base by a very sharp edge, it also helps to spray the paint at a right angle to the wheel and in thin layers – spraying at an angle pushes the paint under the margin of the mask the most.
It is a masking accessory for modelers. The package holds neither a kit, wheels nor paints. Store the sheet flat and out of direct sunlight.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
