F-14 Tomcat Stencils + Remove Before Flight 1:48 is a set of technical markings and RBF tags from HGW made as wet transfers with no carrier film for models of the Grumman F-14 Tomcat fighter.
Responsibility details are not available.
The set holds the complete technical markings, the stencils, of the Grumman F-14 Tomcat carrier fighter together with Remove Before Flight tags in 1:48. It is made with the wet transfer technology of the Czech maker HGW: only the colored layer of the print passes onto the model, with no glossy carrier film, so the small lettering looks as though it were printed directly onto the surface.
The F-14 Tomcat was a two-seat supersonic fighter aircraft of the US Navy with variable-geometry wings. The set brings a great many service and safety markings, warning signs and maintenance lettering with which the real machine was densely covered, plus the pronounced red Remove Before Flight tags, which bring a model to life when it is presented on the ground.
Degrease the base and cover it with a gloss coat; a smooth surface is fundamental for wet transfers. Dampen the lettering, place it, press the water out from underneath and once dry peel the transfer film off. We recommend a compatibility test with the clear coat used beforehand. Close the work with a matte or semi-gloss coat.
This is a supplementary sheet of markings. The model, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
