4K Sculp-Tech 2 x (20x30x1)

4K Sculp-Tech, a pair of boards for building terrain

A material for building the terrain of a diorama that the modeler shapes himself. The boards are cut, sanded and finished, so that the ground of a scene, a slope, a sidewalk, a wall and the inner partition of a ruined house can arise from them. It is a shapeable material for building, not a finished accessory. The name gives two pieces and the dimensional figure 20 x 30 x 1; the exact dimensions and the thickness are on the packaging. The thinner form suits layering and flat elements rather than massive terrain.

Use

• The flat ground of a scene, sidewalks, roadways and ramps
• Layering thin boards into steps and slopes of terrain
• Walls, partitions and simple structural elements
• A base under texturing compounds, sands and vegetation

How to work with the boards

Cut with a sharp knife with a new blade; a thin board can also be snapped along a scored groove. Level the edges with a file, and the surface can be scribed and impressed before a texture is laid on. Always try the glue and the paint on an offcut first: solvent-based products can attack foam materials, while dispersion glue, plaster and acrylic paint tend to be safe. When layering, let each layer dry and weight it down, or the joint will open up. Do not breathe in the dust from sanding.

Who the material is for

For builders of dioramas and vignettes in every scale, for modelers who need a light and dimensionally stable base under a model, and for beginners too. Thinner boards forgive mistakes, because they are easy to cut and a piece can simply be replaced if the shape does not come off.

This is a material for building a scene, not a finished accessory. Paints, glues and texturing compounds are not included in the package, unless stated otherwise.