1:144 Bachem Ba-349 Natter is a photo-etched accessory set for a kit of this machine that you have already bought, not a model. It adds the fine metal detail that a plastic part cannot carry in this scale.
Responsibility details are not available.
An aftermarket accessory from Brengun intended for the Brengun kit. It is not a kit or a finished model. The set is etched from thin sheet whose thickness is incomparably closer to reality in 1:144 scale than injected plastic. What is typically handled this way are features that on the real machine are made of sheet metal or wire and in plastic would have to be several times oversize.
The Bachem Ba-349 Natter was a German single-seat rocket-powered interceptor from the end of the Second World War, launched vertically from a guide tower. The airframe was largely of wooden construction and power came from a liquid-fuel rocket motor supplemented by booster rockets. The machine was very small, which in 1:144 scale means a model a few centimeters long, and that is exactly why every needlessly thick part stands out on it.
Before you start building, set up your workplace: a light surface, fine tweezers, a sharp scalpel, a magnifier. Cut the parts off as close to the fret as you can and level the remaining stub with a fine file, stroking away from the part. Degrease the photo-etched parts with alcohol before gluing, as fingerprints hold grease and the paint then will not sit. Make the bends in a bending tool; on small parts it helps to press a razor blade against the part and bend it with a second pair of tweezers. It is bonded with super glue in minute drops. A primer is mandatory on photo-etched parts, and only over it does the covering shade belong.
This is an accessory set for a model, not a kit. Glue, paints and the base kit are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
