Circles 3.0 mm Oramask foil is a universal masking sheet from the brand Omask with pre-cut discs 3.0 mm in diameter, made in Oramask masking foil.
Responsibility details are not available.
A universal masking sheet with pre-cut discs three millimeters in diameter. It is not tied to a particular kit, so you can use it whenever you need to cover a round area or, conversely, to spray a regular circle. The discs are already cut out, so there is no cutting of rings from masking tape, where an exact shape cannot be held.
The area has to be clean and degreased, and the paint under the mask cured. Lift the disc off the sheet with pointed tweezers, lay it in place and press it home all the way round, because an edge that has not seated is the most common cause of paint running under the mask. Spray in thin layers and preferably perpendicular to the mask rather than at a shallow angle. Take the mask off while the paint is freshly dry, and pull it back over itself at a low angle.
Oramask foil is stiffer than paper masking tape and holds its shape, so the edge of the sprayed circle comes out sharp. With larger diameters that shows most, because a wavy edge would be clearly visible on a three-millimeter circle. In deeply shaped places the more flexible tape variant of the same diameter is easier to work with, and Omask makes that one as well.
Keep the sheet flat and protect it from dust, so the backing keeps its tack.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
