One package for two related versions: masks for the glass and the insignia, decals and a pair of turned barrels for above the engine.
Responsibility details are not available.
There are two numbers side by side in the name of this item, and there is a logic to it. Both forms shared the airframe, the cockpit and the cowling; they diverged practically only in the barrel that fired between the cylinder banks. The older of them had a weapon of 15 mm caliber with a long slender barrel and a high muzzle velocity, the younger got a shorter 20 mm version of the same design with a markedly heavier shell. Pilots praised the first variant for its accuracy and the second for its destructive effect.
Above the engine a pair of machine guns of 7.92 mm caliber stayed on both, and that is why one set can serve both forms. The metal muzzles in the package belong to exactly this pair. The cannon passing through the propeller shaft has no metal part; its muzzle is part of the propeller spinner from the kit and you will recognize it by a noticeably larger opening with a blunt, squarely cut rim.
Besides the metal you will find here masks for the cockpit canopy outside and inside, three masks for the national insignia and a sheet of decals. The target is the model from Hasegawa, for which a resin interior from Aires is mentioned as well. Working with a mask is easier than with a decal: a marking sprayed with paint has no film around its edge to shine in a sharp light and forms no step on the layer of paint. With a mask the marking can also be sprayed over riveting, where a decal would never settle without wrinkles.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
