Quickboost MiG-23 Flogger spill doors 1:32 is a small resin detail set that will add to a model of the MiG-23 fighter the spill doors of the air intakes.
Responsibility details are not available.
This is not an airplane kit but an add-on resin set from the Quickboost brand in 1:32 scale. The set holds the spill doors tied to the air intakes, which on a model of the MiG-23 will sharpen up the shape of the intakes. The set is meant for more experienced modelers.
The MiG-23, under the NATO reporting name Flogger, is a Soviet fighter with a variable-geometry wing. Its side air intakes were rounded out by spill doors regulating the flow of air into the engine in the various modes of flight.
First wash the resin parts free of mold release residue, cut off the casting blocks carefully and glue them with super glue (cyanoacrylate). Use respiratory protection when sanding. Fit the doors to the shape of the air intakes with care. The surface is usually painted with an airbrush and the detail picked out with a fine wash.
This is an accessory, not a complete model of an airplane. The base kit, glue, paints and other parts are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
