A set of replacement wheels with the Pirelli Artiglio tread pattern for a model of the Italian Autoblinda 40 or 41 armored car in 1:35 scale.
Responsibility details are not available.
The Autoblinda 40 and 41 were Italian armored cars of the Second World War. The vehicle had drive and steering on all four wheels and a second driver's station at the rear, so it reversed just as nimbly as it drove forward. The 41 version carried a 20 mm gun in the turret and became the most widespread variant of the whole series.
On an armored car the wheels belong among the most conspicuous parts. The set offers a replacement with the Artiglio tread pattern rendered, that is, with a design that was characteristic of Italian hardware, and with a sharper transition between the rubber and the disc than parts from a kit tend to have.
First check whether the opening in the wheel fits the stub of the axle; widen it carefully with a small drill if need be, so that the wheel can be fitted without pressure. If the wheel has a flattening of the tire suggested, turn it toward the ground and level all four wheels against a horizontal surface, so that the model does not stand crookedly. Wash and degrease the parts before painting. The rubber looks more faithful in a dark gray tone than in pure black; then accentuate the tread pattern with a dry brush and with dust from the edges of the tread.
This is an accessory to a model of the vehicle. The paints and the glue are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
