29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.
1:35 Modern US M270A1 Mittlere Artillerie Racketen System (MARS) Cabin Interior(For TRUMPETER 01046)

1:35 Modern US M270A1 Mittlere Artillerie Racketen System (MARS) Cabin Interior(For TRUMPETER 01046)

13.96 €
Add to Cart

1:35 Modern US M270A1 Mittlere Artillerie Racketen System (MARS) Cabin Interior(For TRUMPETER 01046)

Voyager Model 1:35 M270A1 MLRS – photo-etched set for the cab interior is an accessory for a plastic kit you already own, not a model. It concentrates on the inside of the crew cab of the rocket launcher. Intended for the Trumpeter 01046 kit.

Scale1:35
Manufacturer Voyager Model
Product EAN8591111000000

Responsibility details are not available.

13.96 €
11.54 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Voyager Model 1:35 M270A1 MLRS – photo-etched set for the cab interior

This is not a model but a photo-etched accessory. The set from Voyager Model in 1:35 scale concentrates on the interior of the crew cab and is cut for the Trumpeter 01046 plastic kit. It is a smaller, targeted set rather than a complete refinement of the whole vehicle; the scope of the package is not stated here. It makes sense above all when you are planning open doors or glazing through which the cab will be visible.

The real subject

The M270 is a tracked rocket launcher on a chassis derived from an infantry fighting vehicle, with an armored cab at the front and the launcher at the rear. It carries two exchangeable pods with rockets, which are loaded by a crane from the vehicle itself. The M270A1 version brought an upgraded fire control system and a faster aiming mechanism for the launcher. In German service the system is designated by the abbreviation MARS. The crew consists of three people, who work in that forward cab.

Tips on building the interior

With interior sets a simple rule applies: work up what will be seen and leave the rest basic. First establish dry how much of the cab stays exposed once the doors are closed and the glazing fitted, and divide your effort accordingly. Paint the interior before closing it up and use a lighter base than reality would call for, because there is little light inside and the surface darkens optically. Do not make shadows with a dark wash over the whole area but deliberately into the corners and under the consoles. Instrument panels and levers have fine relief on photo-etched parts, which is brought out by a dry brush in a lighter shade. Fit the glazing at the very end and protect it with masking tape.

Who the set is for

  • Modelers building modern rocket systems in 1:35 scale
  • Builders who want an open cab with a visible interior
  • More advanced modelers with experience of photo-etched parts and painting small areas
  • Dioramas in which a vehicle with open doors is part of the scene

The set is an accessory for a plastic kit, which it does not include. The glue, paints and tools are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. These are photo-etched brass parts for the cab interior; the plastic kit has to be bought separately.

Rather not. An interior set shows only where there is a view in through open doors or glazing.

It is the German designation of the same rocket launcher system, which you will meet on these vehicles alongside the American MLRS designation.

With a lighter base than reality calls for, and with shadows applied deliberately into the corners. In an enclosed space a surface darkens optically.

Last seen

Voyager ModelPE358971:35

1:35 Modern US M270A1 Mittlere Artillerie Racketen System (MARS) Cabin Interior(For TRUMPETER 01046)

Voyager Model 1:35 M270A1 MLRS – photo-etched set for the cab interior is an accessory for a plastic kit you already own, not a model. It concentrates on the inside of the crew cab of the rocket launcher. Intended for the Trumpeter 01046 kit.
In stock
13.96 €
ReskitRSB72-00071:72

1:72 F-16C Fighting Vipers (Block 30,40,42,50,52) with mission marking (Main Decals with Stencils)

Decals for the F-16C with mission markings in 1:72 scale from Reskit. A main sheet supplemented with technical stencils; it is not a kit.
In stock
12.76 €
Kits-WorldKWM7210111:72

1:72 Handley-Page Victor B.2 wheels and canopy paint mask outside only (for Airfix 12008 kit)

A set of painting masks for the glazing and the wheel hubs of the Handley Page Victor B.2 bomber in 1:72 scale. The glazing masks are intended for the outer side and are cut for the Airfix kit number 12008.
In stock
7.96 €
Mirage HobbyMIR4814041:48

1:48 PZL.43 A 'CHAYKA' Bulgarian Air Force 1941-1944

The 1:48 PZL.43 A Chayka Bulgarian Air Force 1941-1944 is a plastic kit of the export version of the Polish light bomber and reconnaissance aircraft from the manufacturer Mirage Hobby.
In stock
33.96 €
Art ScaleASKM320801:32

1:32 Heinkel He 111P-1 double-sided express fit mask for Revell

Art Scale Kit 1:32 Heinkel He 111P-1 double-sided express fit mask is a pre-cut self-adhesive masking set for the clear parts. The packaging designates it for the Revell kit.
In stock
19.16 €
CMKF723851:72

1:72 Avia S-199 Pilot and Mechanic 1/72 / for Eduard and other kits

Avia S-199 pilot and mechanic 1:72 (CMK) is a resin set of two figures - a pilot and a member of the ground crew - for completing models of this fighter. The figures are intended for the Eduard kit and for other kits of the same aircraft.
In stock
8.36 €
CMKCMK45071:48

1:48 Lewis machine gun (two - with ring/bead and reflector gun sights), Lysander / for Airfix kit

The Lewis machine gun for the Lysander 1:48 is a resin (3D-printed) set of two Lewis machine guns with two types of sight for the British Westland Lysander liaison aircraft.
In stock
7.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.