1:48 B-26B-50 Invader, double-sided self-adhesive mask is a pre-cut masking set for the outer and the inner side of the clear parts of a model of the Invader in 1:48 scale. It is an accessory for a kit, not the model itself.
Responsibility details are not available.
A self-adhesive Art Scale masking set for a model of the Invader in 1:48 scale, supplied pre-cut to its final shape. The designation double-sided means that the masks are prepared for the outer and the inner side of the glazing. The inside of the framing can thus be sprayed in the interior shade and the outside in the covering finish of the fuselage, without touching anything in with a brush. That is exactly the difference from the single-sided variant of the same type. The set is an accessory for a kit; the model, paints and glue are not in the box.
Why double-sided masking
On a cockpit that is visible from inside as well, an untreated frame looks unfinished: transparent plastic shows through the clear part instead of the interior color. A double-sided set deals with that detail by spraying, that is, evenly and without brush marks.
The Douglas Invader was a twin-engine all-metal attack bomber with piston radial engines. The version with a solid unglazed nose concentrated the gun armament in the forward fuselage and was intended against ground targets. The aircraft stayed in active service long after the Second World War and went through several modernizations; in modeling it is popular for the large glazed areas of the pilots cockpit and for its varied range of finishes.
Stick the masks onto the inner side of the glazing first and spray the interior shade; only then deal with the outside, because the reverse order is hard to put right. Wash the part before applying them in lukewarm water with detergent and let it dry freely. Seat each mask with tweezers precisely along the outline of the frame and press the edges down carefully with a blunt toothpick. Spray thin coats with enough of a pause between them; paint laid on all at once and heavily runs under. Take the masks off shortly after drying, pulling at an angle along the surface rather than straight up. Adhesive residue can be wiped off with a cotton bud dampened with water.
The box holds masks only. The kit, paints and glue are not included.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
