SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here

1:48 F-4B TFace

A set of pre-cut masking stencils, 1:48 F-4B TFace, from the Czech maker Eduard. It serves for masking the glazing of a model quickly and exactly from the outer as well as the inner side.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

13.80 € 10.36 €
8.56 € without VAT
−25 % You save 3.44 €
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard 1:48 F-4B TFace - a masking set

This is a set of self-adhesive masking stencils in 1:48 scale meant for a model of the F-4B Phantom II aircraft. It is not a kit or a spare part for one, but an accessory that makes spraying the cockpit frames and other surfaces easier. At Eduard the designation TFace means that the set deals with the glazing from both sides, so the frames stay clean when looking into the cockpit as well. The masks are cut from a thin film, which does away with the lengthy shaping of masking tape by hand.

The real subject

The F-4B was the first widely built carrier-borne version of the two-seat supersonic McDonnell Phantom II. It served with the US Navy and the US Marine Corps from the beginning of the 1960s. The aircraft was driven by two jet engines with afterburners and in its original configuration it carried an armament of guided missiles. Its typical recognition features are the upturned wing tips, the horizontal tail surfaces angled downward and the massive nose section with radar.

Usage tips

Stick the masks onto a degreased and perfectly dry surface, best of all with tweezers with smooth jaws. Press the edges down carefully with a toothpick, so that no paint seeps under them. Spraying the interior shade of the frames first and only then the outer color works well. Take the mask off as soon as the paint has set, because once it has fully cured there is a risk that the edge of the sprayed finish will peel away with it. A soft cloth dampened with alcohol will remove any remains of the adhesive.

Who the set is for

  • Modelers who want sharp cockpit frames without cutting tape by hand
  • Builders who are bothered by the difference between the inner and the outer side of the glazing
  • Anyone interested in modern jet aircraft in 1:48 scale
  • Those who want to shorten the most lengthy part of the preparation before spraying

The masks are an accessory to a plastic kit, which is not included in the package. Paints and glue are not supplied. Before buying, make sure that the set matches your kit.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a set of masking stencils, that is an accessory to a kit. The model of the aircraft itself has to be bought separately.

At Eduard it is the form that deals with masking the glazing from both sides, from outside as well as from inside. The cockpit frames then look right when looking into the interior too.

Ideally shortly after the paint has set. On a fully cured and hardened finish there is a risk that the edge of the paint will tear away with the mask.

They are not. The package holds only the masks; paints, glue and the kit itself have to be obtained separately.

Last seen

1:48 F-4B TFace-25 %Stock ClearanceFavorite
EduardEX8031:48

1:48 F-4B TFace

A set of pre-cut masking stencils, 1:48 F-4B TFace , from the Czech maker Eduard. It serves for masking the glazing of a model quickly and exactly from the outer as well as the inner side.
3 leftof 4
13.80 €10.36 € You save 3.44 €
Green Stuff WorldGSW22351:10

Neko Galaxy - Blade Zero 1:10

The collector's bust Neko Galaxy - Blade Zero 1:10 from Green Stuff World. A piece on which several different surfaces meet side by side on a very small area.
In stock
51.16 €
MontexMXK482701:48

1:48 TYPHOON Ib car door

Shaped masks for the early Typhoon Ib with the car door, 1:48 scale. The divided canopy from both sides, two sets of insignia masks and a printed sheet.
In stock
12.76 €
MAiMMAIM357961:35

1:35 Pig with piglets

Pig with piglets (1:35) is a set of animal figures from the manufacturer MAiM intended for a village diorama in 1:35 scale.
In stock
18.36 €
MontexMXSM722561:72

1:72 GNAT F.1

Cut self-adhesive masks for the cockpit canopy of the Folland Gnat F.1 light fighter in 1:72 scale. Fitted to the Special Hobby kit, the outer side of the clear part.
In stock
3.16 €
BandaiBANBP18931

Jujutsu Kaisen - Panda

Jujutsu Kaisen - Panda is a finished collector's figure from Bandai depicting Panda from the anime and manga Jujutsu Kaisen. It comes completely painted, so all you need to do is take it out of the box and stand it in a display case.
In stock
33.56 €
Hobby BossHB872181:72

1:72 AH-64A Apache Attack Helicopter

An injection-molded plastic kit of the American AH-64A Apache attack helicopter in 1:72 scale from Hobby Boss.
In stock
12.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.