MD-3T Mule Tow Tractor in 1:48 stands for the ground support of an American naval squadron. A resin kit for the advanced.
Responsibility details are not available.
The variant marked with the letter T completes the family of deck Mules, and the brand Reskit issues it as a printed resin kit intended for experienced builders. The rendering of the panels is fine, the driver's station has legible controls and the wheels carry a tire tread pattern.
The Mules took care of all movement of machines outside flight itself: they hauled them from the elevator to parking positions, lined them up in rows before launch and cleared the landing area after recovery. The manufacturer ties this version to towing machines of the OV-10 and S-3B types and the UH-1 helicopter. The crews worked in noise, exhaust fumes and salt spray, so figures in colored vests, by which the individual trades were told apart on deck, belong with the vehicle inseparably.
The joints are held best by cyanoacrylate glue, whose bond is instant, and that is why it pays to try the position of a part dry first. Do the sanding wet and with your airways protected. Attach small pieces such as the steering wheel only after the base shade has been sprayed, otherwise they break off easily.
The kit is supplied unpainted in resin; paints, glue and figures are not part of it, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
