A resin ejection seat with seat belts for the MiG-17 in 1:48 scale from Quickboost — a precise cockpit accessory, not a model of the aircraft.
Responsibility details are not available.
A resin ejection seat with cast seat belts for the Soviet MiG-17 jet fighter in 1:48 scale from Quickboost. It is not a model of an aircraft but a precise replacement part for experienced modelers, which takes the place of the simplified seat from the kit and lifts the fidelity of the cockpit at a stroke. The casting captures the fine relief of the straps, the buckles and the shell that is hard to achieve in plastic.
The MiG-17 was a widespread Soviet subsonic fighter of the 1950s which followed on from the successful MiG-15 and served with dozens of countries around the world. The seat is clearly visible under its slid-back canopy, so it is worth concentrating on. The part is intended as a refinement of an existing MiG-17 model in the same scale, not as a kit in its own right.
First wash the resin parts in lukewarm water with detergent to remove the mold release agent. Cut the casting block under the seat off with a sharp knife or a fine saw and sand the surface down; protect your airways when sanding resin. Bond with super glue (cyanoacrylate) — ordinary cement for plastic does not hold on resin. Spray the seat with a base color, bring the belts out in a different shade and pick the buckles out with dry brushing; a light wash will deepen the detail.
Supplied as an unpainted resin accessory for detailing a model. Glue, paints and the model itself are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
