Tamiya Sanding Cloth, 1500 grit, is a flexible abrasive cloth measuring 170 x 130 mm for dry and wet sanding alike. In the sanding process it is the middle step - it removes the scratches left by 1000 grit and prepares the surface for 2000 grit.
Responsibility details are not available.
An abrasive cloth from Tamiya with a grit of 1500, one sheet measuring 170 x 130 mm. It is not a kit and not a model but a tool and a consumable abrasive material. Against sandpaper it has a fabric backing: it is flexible, it goes around rounded shapes and rounded edges, and it does not fold or crack at a bend - and it is precisely creases in paper that tend to cause unexpectedly deep scratches. It can be sanded dry and wet.
Grits work so that a higher number means a finer grain, and sanding goes from coarser to finer. The fifteen hundred is the middle member of the trio 1000 / 1500 / 2000. Its single but crucial job is to remove the scratches left by 1000 grit and to pass the surface on in a state where 2000 grit only smooths it to a finish. Anyone who leaves this step out and jumps from the thousand straight to the two thousand merely polishes the coarse scratches - they do not disappear, and after spraying they show through under the paint, especially under a gloss color or a metallic.
For modelers who build a surface systematically - that is, for everyone who wants a smooth base under the paint. In practice it almost always makes sense to have all three grits: 1000 at the start, this 1500 in the middle and 2000 at the end.
A tool and a consumable, not a kit. Do not inhale the sanding dust - ideally sand wet, otherwise with respiratory protection and ventilation.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
