An add-on set in 1:72 scale containing two pieces of PU 708, two of AT 730 and two LGTR elements. Decals are part of the package.
Responsibility details are not available.
The set completes a model of a contemporary combat aircraft in 1:72 scale with underwing equipment. In the package there are two pieces each of the elements marked PU 708, AT 730 and LGTR, that is a composition that is enough for a symmetrical fit under both halves of the wing. Decals are part of the package as well.
Check the identification of the individual elements and their placement on the model in the maker's instructions before gluing. A composition of two pieces of each element reckons with a symmetrical fit, so lay the parts out before you reach for the glue.
Small parts in 1:72 scale are easily lost, so work with tweezers over a mat with a raised edge. Cut the excess material off with a sharp blade a little away from the part and sand the remainder carefully down. Before painting, wash and degrease the parts so that the paint holds on them. Try the seating of the parts dry first, then choose the glue according to the material of the parts and apply it in a minute amount. Unify the base under the decals with a gloss varnish and, once dry, clear-coat the model with a matte varnish so that the edges of the films disappear.
For modelers who build contemporary aircraft in 1:72 scale and want to fit them with more elaborate underwing equipment. This is an add-on set; the model, the paints and the glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
