Wheels for the Bedford QL in 1:72 scale, pattern 1 with the Goodyear Traction tread are a 3D-printed replacement for the wheels on a model of the British truck. This is an accessory for a model, not a model of the vehicle.
Responsibility details are not available.
A set of 3D-printed wheels for models of the British Bedford QL truck in 1:72 scale. It is an accessory for a finished model, not a model of the vehicle. The printed pieces have a one-piece carcass with no trace of a parting line and a readable tread even over as small an area as a tire has in this scale.
Bedford QLs ran on tires from several makes, and the manufacturer has therefore prepared two variants. This one carries the Traction type tread from Goodyear, and the other variant tires from Avon. They differ in the pattern of the tread, so the choice depends mainly on which period photograph or which particular vehicle you want to capture. If the specific subject does not matter to you, either of them will serve.
The Bedford QL was a British three-ton truck with drive to all four wheels, built from 1941. It came in a whole range of forms - as a flatbed, a tanker, a workshop, a radio vehicle or a tractor for Bofors anti-aircraft guns - and served wherever British and Allied forces reached. It is precisely the wide range of bodies that makes it a rewarding subject for collectors and for scenes.
Separate the wheels from the print supports, clean up the mating surfaces with a sharp knife and seat them with cyanoacrylate glue. Lay down a thin primer before painting, darken the tires to a gray-black shade - pure black looks unnatural - and use the shade of the body on the hub. At the end add dust and mud with pigments, most of all around the tread.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
