1:72 D.520

Dewoitine D.520 1:72 is a color Eduard photo-etched set, that is the line with pre-printed parts for the interior. It is an accessory to a plastic kit of the French fighter, not the kit itself.

Scale1:72
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

13.80 €
11.40 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Dewoitine D.520 1:72 — a color Eduard etch

This set belongs to the color photo-etched line of Eduard for 1:72 scale. The difference from bare brass sets is fundamental: the key interior parts are pre-printed in color including the instrument dials and the belts, so the most delicate painting of tiny details is unnecessary. Compared with the Brassin resin line, an etch offers a realistic sheet thickness and a flat profile that can be glued even into an already finished cockpit. It is not an aircraft model but an accessory for a plastic kit.

The real subject

The Dewoitine D.520 was a French single-seat fighter with a liquid-cooled Hispano-Suiza V12 engine, which reached combat in 1940. Its armament consisted of a 20 mm cannon firing through the propeller hub and machine guns in the wing. Compared with its contemporary opponents it was agile and easy to handle, and its main weakness was the lower output of the powerplant. The cockpit had a typically French instrument layout, which in a small scale can hardly be reproduced believably without color printing.

Building and painting tips

In 1:72 scale the parts are truly tiny, so work on a light surface and with good tweezers. Cut them out with a scalpel close to the tab and sand the surplus down with a file so that no burr is left. Do not spray the pre-printed areas with a covering color; you would lose the whole point of the set. If you need to even out the sheen, use only a thin coat of matte clear. A drop of gloss clear or of clear resin suits the instrument dials and looks like glass once it has cured. Before gluing, check how much plastic has to be removed from the original part so that the cockpit can be closed after installation. It is bonded with super glue in very small doses.

Who the set is for

  • builders of the D.520 in 1:72 scale who want a faithful cockpit
  • modelers who avoid painting miniature dials
  • anyone interested in a quick improvement of the interior without resin
  • collectors of French aviation hardware of 1940

This is an accessory set, not a standalone kit. The base model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The parts come printed in color from production, including the instruments and the belts, so there is no laborious painting and it is enough to glue them in.

It is not. It is a photo-etched accessory to a plastic Dewoitine D.520 model in 1:72 scale, which you have to obtain separately.

Not with a covering color, as the print would be lost. The sheen can be evened out only with a thin coat of matte or satin clear.

The parts are very small in this scale, so at least some basic experience with tweezers and super glue is advisable.

Last seen

EduardED737181:72

1:72 D.520

Dewoitine D.520 1:72 is a color Eduard photo-etched set, that is the line with pre-printed parts for the interior. It is an accessory to a plastic kit of the French fighter, not the kit itself.
In stock
13.80 €
Síra HobbyAW25

Černý

Black : an Air wash from the Czech manufacturer Sira Hobby (30 ml) for picking out the engraving and details of a model.
In stock
3.96 €
LifecolorLIFLC01

LC01 basic matt white

Lifecolor LC01 – Basic Matt White is a matte white water-based acrylic paint for brush and airbrush.
In stock
2.76 €
BRADY PHANTOM-25 %Stock ClearanceFavorite
BandaiBAN63706

BRADY PHANTOM

The mecha kit Brady Phantom from Bandai in snap-fit form: pre-colored parts, snapping together and a build manageable without glue and without paints.
Last one!
39.96 €29.96 € You save 10 €
Síra HobbySE28

Weathered rust

Sira Hobby Weathered Rust is a liquid weathering effect from a Czech maker for convincingly aging metal and for the shade of weathered, settled rust.
In stock
3.56 €
MadworksWD500

TS Wide Chisel 5mm (1 piece)

The Madworks TS Wide Chisel 5 mm is a wide flat tungsten steel edge for engraving and cleaning up on models. It is supplied as a standalone replaceable edge, without a handle.
In stock
15.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.