1:72 F-6C

Eduard 1:72 F-6C is a full photo-etched set for a model of the reconnaissance version of the Mustang. The pre-painted parts are glued on in their colors as they are and will not take being sanded.

Scale1:72
Manufacturer Eduard
Product EAN8991111049784

Responsibility details are not available.

13.80 € 10.36 €
8.56 € without VAT
−25 % You save 3.44 €
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard Full Photo-Etched Set 1:72 F-6C

A set of photo-etched parts from the manufacturer Eduard for a plastic model of the F-6C reconnaissance aircraft in 1:72 scale. It belongs to the full color series, that is to the more extensive variant of the accessory with pre-painted parts. The set is neither a model of an aircraft nor a kit; the base model has to be obtained separately. The exact contents of the sheets are not stated here.

The real subject

The F-6C is the photo-reconnaissance variant of the P-51 Mustang fighter, adapted to carry cameras. Outwardly it stays very close to the Mustang and differs mainly in its equipment, so in building it the detail decides, not the shape.

What the set changes on a model

On a type that differs from the basic version in fine points, it is precisely the detail that moves the quality on. The pre-painted parts come finished in their colors and save the most demanding painting, and the rest of the sheet is made up of metal parts in bare sheet. Working with colored photo-etch has its rule, though: the finished color layer is thin, and any sanding, aggressive thinner or heavy application of cyanoacrylate will damage it beyond repair.

Building tips

Take the pre-painted parts with tweezers by the edge, not with your fingers, and do not try to knock them back to matte. Dose the glue with a pin in minute drops. Finish the interior before the fuselage is glued together. The bare metal parts, by contrast, should be degreased and sprayed with primer before painting, otherwise the finish will not hold on the smooth sheet.

Who the set is for

  • Builders of aircraft models in 1:72 scale.
  • Modelers who build less usual versions of well-known types.
  • Those who prefer finished colored parts to painting by hand.
  • More experienced builders used to working with photo-etch.

The set is an accessory for building a plastic model, not a model in its own right. The base kit, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is the photo-reconnaissance variant of the P-51 Mustang fighter, adapted to carry cameras.

Small touching-in with paint is possible, but sanding and strong thinners will damage the layer. The parts are meant to be used as they are.

Photo-etched sets are cut for a particular kit. Which one that is is not stated here, so compare the designation of the set with your model.

Rather not. The parts are bent and glued with cyanoacrylate, and in 1:72 scale they are genuinely small.

Last seen

1:72 F-6C-25 %Stock ClearanceFavorite
EduardED737751:72

1:72 F-6C

Eduard 1:72 F-6C is a full photo-etched set for a model of the reconnaissance version of the Mustang. The pre-painted parts are glued on in their colors as they are and will not take being sanded.
Last one!of 2
13.80 €10.36 € You save 3.44 €
EduardED321611:32

1:32 A6M2 Zero type 21 motor

Eduard 1:32 A6M2 Zero type 21 engine is a photo-etched set for refining the engine section of a model of the Japanese Mitsubishi A6M2 Zero carrier-based fighter. An accessory for a plastic kit.
In stock
15 €
Art ScaleASKM321411:32

1:32 Dornier Do 335A-0 Pfeil double-sided mask for Zoukei Mura

Double-sided painting masks for the Dornier Do 335A-0 Pfeil in 1:32 from Art Scale. Self-adhesive masks for masking the glazing from the outside and from the inside.
In stock
7.96 €
GAS HANSGH-NB12008

Flat Spherical Rivet 1.0 mm

GAS HANS Flat Spherical Rivet 1.0 mm is a set of fine resin (3D-printed) rivets with a flattened hemispherical head 1.0 mm in diameter for detailing models.
In stock
3.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.