The set of masks 1:72 Ki-44 Shoki Nat. Ins. w/ white outline from the Dead Design brand is for spraying national insignia with a white border onto a model of the Japanese interceptor.
Responsibility details are not available.
A masking set from Dead Design meant for spraying the Japanese national insignia onto a model of the Nakajima Ki-44 Shoki in 1:72 scale. The name specifies the rendition with a white border. The package holds masking, not the plastic parts of the aircraft.
The Ki-44 was created as the opposite of the Japanese school of agile fighters of the time. Nakajima designed it around a powerful radial engine with the emphasis on climb and speed, which called for a small wing and a high landing speed: pilots used to light types had to get used to it. That is exactly why it proved itself in the defense of Japanese airspace, where a fast climb to the bombers was what was needed. Home defense machines in dark camouflage were usually marked with an insignia with a white outline, so that the disc would be clear.
Check the symmetry of the discs on the model before you press a mask down for good. Measure the distance from the wingtip and from the leading edge on both halves and mark it in pencil; in this scale the eye reliably picks up a deviation of one millimeter, especially when looking down from above. On the fuselage go by the panel joints, not by an estimate from the cockpit.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
