A set of photo-etched parts for a model of the OV-10D+ Bronco observation and light attack aircraft in 1:72 scale.
Responsibility details are not available.
The OV-10 Bronco is an American observation and light attack aircraft, recognizable at a glance by its pair of tail booms and the glazed front of the fuselage, which gives the crew a view in almost every direction. The machine was built for work low over the ground, for directing fire onto targets and for operating from short and unpaved strips. The OV-10D+ designation belongs to a later form of the D series.
Photo-etched parts for a model in 1:72 scale. In a small scale the difference between a plastic and a photo-etched part shows most, because plastic cannot be thin enough here. Which kit the set is intended for and where the individual parts belong are given in the manufacturer's instructions; photo-etched sets tend to be tied to one particular kit, so check that beforehand.
Expect very small work. Have sharp tweezers, a new knife, good light and a steady hand ready. Separate the parts on a firm surface, sand the tabs and remove the plastic detail under the photo-etched part in advance. Degrease the metal and go over it with a primer, and only then paint.
The set is for more experienced modelers who do not want to give up detail in 1:72 scale. Unless stated otherwise, the kit, paints and glue are not part of the delivery.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
