1:72 Polish chessboards for Polish jets MiG-21, MiG-29, Su-22, F-16 and others

1:72 Polish chessboards for Polish jets MiG-21, MiG-29, Su-22, F-16 and others

5.16 €
Add to Cart

1:72 Polish chessboards for Polish jets MiG-21, MiG-29, Su-22, F-16 and others

A set of national insignia for Polish aircraft, graded into several sizes. It will serve where a kit has no markings or where they have yellowed with age.

Scale1:72
Manufacturer Model Maker
Product EAN9991111991823

Responsibility details are not available.

5.16 €
4.26 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The checkerboard that has been flying since 1918

The Polish national insignia came into being right at the start of the independent state and has essentially not changed since: four alternating white and red fields arranged into a square. Over a hundred years it has been through only small adjustments of proportion and edging, so the same symbol is carried by biplanes of the 1920s and by modern fourth-generation fighters alike.

What a generic sheet is good for

This item is not tied to one subject. It offers a set of insignia in graded sizes, so you choose the dimension matching the machine you are building at the time: from the smaller motifs on the fuselage to the large insignia on the wings. It comes in handy above all where the original kit has no markings, where they have yellowed with age, or where you want to build a machine for which nobody has released a sheet of its own.

Which types it aims at

According to the name they are primarily intended for Polish jet fighter and attack machines, that is for older Soviet designs as well as for today's American types. Nothing, however, prevents using them elsewhere if the size fits.

What the insignia looks like

The fields alternate around the perimeter, white with red. On a dark base you have to watch that the light part does not stay translucent, because it is precisely that which decides the resulting impression of the whole insignia.

Recommendations for use

Older prints from kits tend to be brittle and break. Apply a new insignia, therefore, onto a well-prepared gloss base and a few minutes after settling check whether the edge has lifted anywhere. This sheet is not tied to one subject, so it is sensible to keep it in reserve.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

They are graded into several sizes and aimed at Polish jet machines. They can be used anywhere the dimension matches.

Yes, that is its main purpose. Older prints often yellow and break during application.

The set is focused on the national insignia. Look for the numbers of particular machines on a sheet tied to that subject.

Lay the insignia on the model dry and compare it with a period photograph of the type; the ratio to the wing is the most reliable guide.

Last seen

Model MakerMM-D721351:72

1:72 Polish chessboards for Polish jets MiG-21, MiG-29, Su-22, F-16 and others

A set of national insignia for Polish aircraft, graded into several sizes. It will serve where a kit has no markings or where they have yellowed with age.
In stock
5.16 €
AberABR35L0651:35

1:35 German 50mm KwK39L/60 barrel for Pz.Kpfw. III Ausf J, L, M.

A turned metal barrel 50 mm KwK 39 L/60 for the Pz.Kpfw. III Ausf. J, L and M in 1:35 scale from the manufacturer Aber. A metal part with a finished muzzle in place of a plastic barrel.
In stock
6.76 €
Aires/AerobonusAER4801581:48

1:48 Czechoslovakian Air Force Fighter Pilot with seat for Avia B.534 III. Series (1935-1939)

A resin figure of a Czechoslovak fighter pilot with a seat for the Avia B.534 (III series, 1935 to 1939) in 1:48 scale by the brand Aerobonus. A figure to be painted, not a model.
In stock
7.20 €
AberABR35A0271:35

1:35 Covering to model plastic fenders for PzKpfw III. Sturmgeschutz III

Covering for the plastic fenders of the Pz.Kpfw. III and the Sturmgeschütz III is an Aber photo-etched detail set in 1:35 scale. It holds thin metal sheet for refining the surface of the fenders.
In stock
8.76 €
Old PropellerOPD32022W1:32

1:32 5 COLOR UPPER AND LOWER WINGS LOZENGE FOR FOKKER D. VII (OAW. ) WNW KIT

Five-color lozenge pattern for the upper and lower wing surfaces of the Fokker D.VII in 1:32 scale from Old Propeller. The sheet is cut for machines built by Ostdeutsche Albatros Werke.
In stock
14.76 €
Voyager ModelPE353141:35

1:35 WWII German 150mm s.IG.33(Sf) auf Pz.Kpfw.I Ausf.B Amour Plate (For DRAGON 6259)

1:35 s.IG.33 (Sf) on the Pz.Kpfw.I Ausf.B chassis — photo-etched armor plates are an add-on set for a plastic kit you already own, not a standalone model. They replace the thick-walled plastic walls of the fighting compartment with thin metal, and the set is cut for the Dragon 6259 kit.
In stock
27.16 €
AberABR700L021:700

1:700 Set of 8 pcs 380 mm short barrels for turrets with antiblast covers ships Richelieu, Jean Bart

A set of 8 turned 380 mm barrels from Aber in 1:700 in the short form for turrets with blast bags, intended for models of the ships Richelieu and Jean Bart.
In stock
4.40 €
Easy ModelEA368001:72

1:72 F-84G"Four Queens/OLIE",Flown by Joe Davis,58 FBG.Base Taegu,Summer 1953

The F-84G Thunderjet in the personal Four Queens markings of the summer of 1953 is a finished model in 1:72 scale from the maker Easy Model. It is supplied assembled and painted; nothing is glued or painted.
In stock
17.16 €
MASTERSM7000391:700

1:700 USN 5in/51 (12,7 cm) (22 pcs) - many USN warships - fits to USS Arizona model

Turned brass barrels for the USN 5in/51 gun (127 mm caliber, 5 inches) in 1:700 scale from the MASTER company. The set contains 22 pieces . The real subject is the anti-ship casemate gun of many American warships; it also suits a model of USS Arizona.
In stock
5.96 €
Star DecalsSD72-A11011:72

1:72 ISAF-Afghanistan # 2. Peacekeepers from France. Renault VAB, VAB Sanitaire, Panhard VBL.

ISAF Afghanistan 2 - French members of the peacekeeping force is a set of water-slide decals in 1:72 scale for the Renault VAB, VAB Sanitaire and Panhard VBL vehicles.
In stock
8.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.