An accessory set in 1:72 scale for vehicle and aircraft models, listed under the designation rescue kit. Meant for completing a finished model.
Responsibility details are not available.
An accessory for models in 1:72 scale, listed under the designation rescue kit. The product name is incomplete and ends with a preposition, so it does not say which machine the set is prepared for. Before fitting it, therefore, compare the dimensions of the parts with your model and follow the manufacturer's instructions that belong to the item.
Accessory sets of this kind are bought to go with a finished kit. The small 1:72 scale tempts one to assume that detail will not tell, but the opposite is true: it is precisely the small equipment that decides whether a model reads as a model or as a scaled-down real machine. The set deals with one area, so it sits well alongside other accessories and your own modifications.
The parts are not polystyrene, so they are glued with cyanoacrylate glue. Cut the excess material off with a sharp blade a little away from the part and carefully sand the remainder, so that the mating surface stays flat. Wash and degrease the parts before painting, otherwise the paint will not hold. Apply the paint in thin coats so that the fine shapes stay visible, and finish the small details with a thin brush. The manufacturer's instructions give the exact procedure and the placement on the model.
The paints and the glue are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
