A display base for a 1:72 model with the Ukrainian flag came about by printing an acrylic board 3 mm thick with an area of 280 x 180 mm. It offers a flat base under finished hardware.
Responsibility details are not available.
Blue above yellow, two horizontal stripes of equal width across the whole printed area: that is the simplest possible motif and at the same time one of the most effective. The carrier is acrylic glass 3 mm thick, 280 x 180 mm in size and 170 g in weight. The manufacturer is the Ukrainian brand Kelik.
The pair of colors tends to be read as sky above a ripe field of grain, and in this form it has been in use since 1918, with a return to the state symbols at the start of the 1990s. Dividing the area exactly in half creates a striking horizontal break under the model.
The light lower stripe underlines a darker camouflage, so machines such as the MiG-29, the Su-25 or the L-39 Albatros trainer stand out on the board. We recommend placing the hardware rather on the boundary of the two bands, because a model stood in one half alone optically veers to the side. By the shorter edge there is room enough for a plate with the unit designation. For cleaning a damp cloth without abrasive pastes is enough.
Prepare the built model yourself; the board comes without one.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
