1:72 Vultee Vengeance Mk.II are die-cut Eduard masking stencils for a model of the dive bomber that served with British squadrons.
Responsibility details are not available.
A set of masking stencils from the Czech manufacturer Eduard for a model of the Vultee Vengeance Mk.II dive bomber in 1:72 scale. The stencils are cut to the shape of the glazing of that particular model, so the tedious cutting of tape falls away and the sprayed frames come out even over their whole length.
The Vengeance was created in the United States to a British order and it went into action above all in the Burma theater, where it was used by Royal Air Force squadrons and by the Indian Air Force. Characteristic is the wing with zero incidence angle, thanks to which the machine descended almost vertically in a dive. The designation Mk.II corresponds to one of the delivery batches for British users.
First get the grease off the clear parts. It usually pays to underlay the frames with the shade of the cockpit and only then spray the outer camouflage, so that the area showing through does not look out of place. Cover the rest of the glazing with a piece of tape or with liquid mask, or the overspray will settle a gray veil on the glass. Once the stencils are off, cover the glass again straight away, so that sanding dust does not settle on it during the rest of the build.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
