1:32 MIG-29M Fulcrum

An extensive plastic kit of the Russian multirole MiG-29M in the large 1:32 scale from Trumpeter. The finished model is about 543 mm long.

Scale1:32
Manufacturer Trumpeter
Product EAN8591111022385

Responsibility details are not available.

75.56 €
62.45 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The MiG-29M in the large 1:32 scale

An injection-molded plastic kit of the Russian single-seat multirole MiG-29M from Trumpeter. The 1:32 scale means a large model: it is about 543 mm long and 355 mm in span. The kit has over eight hundred parts, so it is not a job for one evening.

The real subject

The MiG-29M is a development of the well-known twin-engine aircraft with a high-set wing and twin fins. It is powered by two turbofan engines. Compared with the older machines it received a modified fuselage spine with a greater fuel capacity, a reworked cockpit with screen instruments and a wider choice of armament for work against ground targets. The auxiliary dorsal intakes that the older versions had for operating from unpaved surfaces also disappeared.

  • 1:32 scale, injection-molded polystyrene
  • Over eight hundred parts
  • The finished model is about 543 mm long, with a span of 355 mm
  • Clear parts, photo-etched metal and rubber tires in the package
  • Water-slide decals and instructions

Building and painting tips

Follow the instructions section by section and do not rush the gluing of the fuselage until the internal fittings and the air intake ducts are finished. On a model of this size it pays to paint by subassemblies, because many places can no longer be reached once they are glued. Bond the photo-etched parts with super glue onto a degreased surface and give them a primer before painting. Reckon with the finished model needing a lot of room on a shelf.

Who it is for

For the experienced modeler who wants one striking piece instead of five small ones and does not mind a longer build. The number of parts and the size of the model allow the cockpit and other spaces to be opened up and the detail shown off.

The package contains plastic and clear parts, decals and instructions. Paints, glue and varnishes are not included, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is about 543 mm long and 355 mm in span. Before building it is a good idea to think about where you will put it.

Rather not. Over eight hundred parts and the need to paint by subassemblies mean a longer job, for which it is better to have some experience already.

Plastic and clear parts, decals and instructions. Paints, glue and varnishes are not included, unless stated otherwise.

Super glue onto a degreased surface. Cement for polystyrene will not join metal, and paint holds on bare metal only with a primer.

Last seen

TrumpeterTR022381:32

1:32 MIG-29M Fulcrum

An extensive plastic kit of the Russian multirole MiG-29M in the large 1:32 scale from Trumpeter. The finished model is about 543 mm long.
In stock
75.56 €
Royal ModelRM3991:35

1:35 Transmission Chain Dragon Wagon

The chain drives of the rear axles of the American heavy tractor in 1:35 of photo-etched sheet. A metal accessory for builders of recovery vehicles, the brand Royal Model.
In stock
25.16 €
TrumpeterTR028221:48

1:48 F-100D Thunderbirds

In stock
31.16 €
Royal ModelRM1801:35

1:35 Shurzen Panther A

Royal Model: Schürzen for the Panther Ausf.A 1:35 is a photo-etched set of side armor plates for a model of the Panther medium tank.
In stock
9.16 €
Royal ModelRM5841:35

1:35 Animal water trough

1:35 Animal water trough : a drinking trough for farm animals as an accessory to a country scene in 1:35 scale.
In stock
11.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.