Airbrush SP-35B (0,35mm Nozzle)

Airbrush SP-35B: a Sparmax airbrush with a 0.35 mm nozzle

A modeling airbrush from the Sparmax brand in the SP-35B form. It is neither a kit nor an accessory for a model but a tool for applying paint. The name gives the nozzle size as 0.35 mm, the figure that most affects the character of the spray on an airbrush.

What the nozzle size means

A nozzle of around 0.35 mm lies in the middle of the usual range and tends therefore to be the first choice for modelers who want one airbrush for most of their work. It copes with base coats on fuselages and hulls, camouflage transitions and larger detail, without making the demands on paint preparation that the finest nozzles do. For the finest lines on figures a smaller nozzle suits, and for extensive uniform areas a larger one.

Operation and maintenance

• Flush the airbrush after every session; dried paint is the most common cause of trouble.
• Slide the needle in slowly and without force, so that the tip is not damaged against the nozzle.
• Do not use metal tools for cleaning, as they scratch the inner surfaces.
• Needles, nozzles and caps for these airbrushes are commonly bought as spare parts according to the particular model.
• Try the settings and the consistency of the paint on a scrap surface.

Who the airbrush suits

• Modelers looking for an all-round airbrush for most of their work
• Builders of plastic kits and military vehicles
• Modelers who combine base coats with camouflage transitions

Go by the manufacturer's instructions before first use. Spray in a well-ventilated space and protect your airways.