AK Interactive brass pipes 1.1 mm is a set of five hollow brass pipes with an outside diameter of 1.1 mm for detailing and scratchbuilding.
Responsibility details are not available.
A set of five hollow brass pipes with an outside diameter of 1.1 mm. They serve as material for detailing and for building your own parts (scratchbuilding) on plastic models and dioramas. Thanks to the hollow construction they can also be used where an opening is needed or where a thinner wire or a pipe of a smaller diameter has to pass through.
For modelers who replace plastic parts with metal for strength and scale fineness. Brass is easy to cut, sand and solder; it is bonded with cyanoacrylate glue (super glue) or soldered. Degrease the surface before painting and use a primer for metal.
Sharp edges appear after cutting – work carefully. Do not inhale the metal filings and sweep them up.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
