Brass pipes 1.7 mm (5 pcs) from AK interactive are hollow brass sections for scratch-building and for detailing plastic models.
Responsibility details are not available.
A set of five hollow brass pipes with an outside diameter of 1.7 mm. It is a modeling material for scratch-building, not a kit. Brass is easy to cut, bend and solder, and hollow pipes will serve as barrels, exhausts and pipework.
Cut with a fine saw or with a snap-off knife while rotating and clean the ends up; on barrels, drill the muzzle out lightly. Neighboring diameters can be telescoped together. Bond with cyanoacrylate glue (super glue) or solder; before painting, degrease the brass and apply a metal primer.
This is raw material, not a finished part. Clean up the sharp ends after cutting. Glue, paints and tools are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
