Clear airbrush foil A5 3pcs

Clear airbrush masking film A5, 3 pieces (MH models)

This is a modeling supply, not a model or an accessory for one. The clear film serves as a universal material for your own masks and templates. The A5 format is an advantage over smaller sheets where you need to cover a continuous area with a single piece, that is, on whole wings, the sides of a fuselage, the hull of a vehicle or on large models in 1:32 and 1:35 scale. Fewer joined pieces mean fewer places where paint can blow underneath. The package contains three sheets.

Use

• Continuous masks for the large areas of wings, fuselages and hulls
• Templates for segmented and mottled camouflage with a sharp edge
• Protection of already sprayed parts of a model from overspray
• Templates for repeating motifs and insignia
• Covering the cockpit and glazing while spraying the surrounding area

How to work with the film

Cut with a sharp scalpel on a cutting mat, as a blunt blade tears the material. With large templates, sketch the shape on paper first, lay it under the clear film and only then cut, which will save material. Press the film down along the whole edge and secure it in the surrounding area with masking tape or paper, so that it is not lifted by the stream of air. Spray perpendicularly, in thin coats and preferably from a greater distance, because an angled coat will blow under even a well seated mask. Take the mask off while the paint has set, and always in the direction from the edge into the sprayed area.

Who the film is for

• Modelers working with an airbrush on larger models
• Builders of aircraft and machinery with segmented camouflage
• Those who prepare their own reusable templates

The film is a consumable. Cut it on a mat with a sharp blade and take the mask off carefully after spraying, so that the paint is not pulled away.