29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

Grass mat, light green, 75 x 100 cm

A grass mat in light green measuring 75 x 100 cm from the HEKI brand, a ready-made grassy surface for dioramas and model railroad layouts that is laid down and glued to the base.

Manufacturer HEKI
Product EAN9991117367319

Responsibility details are not available.

13.56 €
11.21 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

HEKI grass mat, light green, 75 x 100 cm

A ready-made grassy surface for dioramas and model railroad layouts: a flexible mat with grass fibers applied to its face in a light green shade. The 75 x 100 cm format covers a fairly large area at once, so the basic greenery is laid in more quickly than by scattering. The light green shade matches spring and freshly mown grass and serves well as a base onto which a variety of color is then mixed in with other materials. The manufacturer is HEKI, a German brand of terrain-building materials.

How it is used

  • Measure the mat out and cut it to the shape of the terrain with sharp scissors or a knife
  • Free the base of dust, lay the mat down and glue it with PVA or contact adhesive
  • Disguise the edges and the seams with scatter material, flock or small bushes so that the transitions are not visible
  • Enliven a monotonous area with darker and yellower patches, tufts of taller grass and paths

Who it is for

For builders of dioramas for plastic models and for model railroads as well, especially when a large area of greenery has to be laid in quickly and with a uniform base. It suits beginners too: a mat forgives more than scattering and gives a usable result the first time. More experienced modelers often use it only as a lower layer, which they then cover with scattered grass, tufts and bushes, so that in the finished build the mat cannot be made out at all.

The mat is supplied on its own, without glue and without further terrain materials, unless stated otherwise. When cutting, work on a mat and guide the knife away from you.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Usually with PVA wood glue or with contact adhesive, depending on the material of the base. Apply the glue over the whole area and weight the mat down until it has dried, so that it does not curl.

Cover the joint with scatter material, grass flock or low bushes. It also helps to run the joint along a natural boundary, for instance by a path, a stream or the edge of a wood, where a change of surface is expected.

Yes. Monotony is best broken with a light overspray of a darker or yellower paint from a greater distance and by adding more flock. Spray in thin coats so that the fibers do not go limp.

Last seen

HEKIHEKI30901

Grass mat, light green, 75 x 100 cm

A grass mat in light green measuring 75 x 100 cm from the HEKI brand, a ready-made grassy surface for dioramas and model railroad layouts that is laid down and glued to the base.
In stock
13.56 €
HEKIHEKI2343

Model Fir (35 cm)

One model fir 35 centimeters tall . A large single tree for garden railroads and sizeable dioramas.
In stock
35.96 €
MadworksMWTS-080

0.8 mm Tungsten Steel Line Engraver - 1 piece (tang diameter 3mm)

Madworks Tungsten Steel Line Engraver (0.8 mm) is a tungsten steel scriber for engraving very wide panel lines on models.
In stock
11.16 €
HEKIHEKI15154

Realistic foliage brown, 200 ml

HEKI Realistic foliage brown, 200 ml is a fine leaf foliage in brown for autumn leaves, dry growth and transitional areas.
In stock
8.36 €
EduardR00241:48

1:48 P-40K Warhawk Royal Class Edition

A plastic model of the American fighter Curtiss P-40K Warhawk in 1:48 scale from Eduard — the Royal Class edition (Dual Combo: two complete kits).
In stock
108 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.