Masks for the wheels of the T-34 tank in 1:35 scale. They make it easier to separate the tire band from the rim without laboriously drawing the paint round with a brush.
Responsibility details are not available.
The road wheels of the T-34 are one of the places where a build is held up most often. There are a great many wheels on the model, each has the tire band and the rim in a different tone, and drawing the boundary round with a brush so that it is equally round and equally wide on all of them is work for a whole evening. A mask shortens this step: it holds the boundary for you and it is identical on every wheel.
The masks are stuck onto the part before spraying, onto a surface that is clean, degreased and dry. Press the edge down with a toothpick or the blunt tip of tweezers, so that paint does not run under it. Spray in thin coats and rather at a right angle to the surface, because under an oblique spray the paint gets under the edge more easily. Take the mask off as soon as the paint becomes tacky; if you leave it on the part until it has fully cured, it can tear the edge of the coat away with it.
For builders of the T-34 in 1:35 scale who want their wheels done quickly and uniformly. They pay off wherever the model stands on a clearly visible running gear and the wheels are not covered by mud or by a load. Which kit the masks are cut for should be checked against the manufacturer's information on the packaging, because the diameters of the wheels differ among the individual releases of the T-34.
The model, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
