1:35 Stencil for applying footprints from boots. 2 types of soles.

What it is for

A scene with figures looks believable only once it is visible on the ground that somebody moved across it. This stencil in 1:35 scale carries the prints of boots and, according to the name, offers two kinds of sole, so the path does not have to look as though a single pair left it.

What the set contains

This is a stencil for applying the prints of boots in two sole patterns, in 1:35 scale. Check the number of the individual prints, the size of the sheet and the material against the manufacturer's information on the packaging. The extent of the package and the recommended procedure for applying it are on the box and in the manufacturer's instructions.

Usage tips

Lay the stencil on finished and dry terrain and press it down, so that the paint does not run under the edge. Apply weakly and in coats. First lay out where the figure walked from and to: the prints should have a regular length of stride, alternate slightly left and right, and point with the toe in the direction of walking.

• divide the two sole patterns between different figures, not between the left and the right foot
• let the prints run out of the scene, as a closed path looks unnatural
• in the place of a stop the prints may be closer together and turned
• on a hard surface only suggest the print, as a pronounced one belongs in mud and dust
• lift the stencil straight up, as shifting it would smear a fresh print

Who it is for

The stencil is aimed at builders of dioramas and display-case bases in 1:35 scale where figures or a vehicle with a crew stand. The work is quick; just try the procedure out as a rehearsal on a piece of cardboard. Figures, the model, a base, paints and tools are not included, unless stated otherwise.