1:48 Avro Anson Mk.I TFace

Eduard Avro Anson Mk.I TFace masking set, 1:48

A TFace masking set from Eduard intended for a model of the Avro Anson Mk.I in 1:48 scale. It is not an airplane model but a masking accessory. The TFace designation means that the set contains masks not only for the outside but also for the inside of the cockpit glazing, thanks to which the glazing frames can be painted accurately from both sides.

What the set solves

• Accurate masking of the cockpit frames and the glazing from the outside
• Matching masks for the inside of the glazing (the TFace feature) for clean color frames seen from within
• Self-adhesive, die-cut masks that follow the way the glazing of the model is divided
• Sharp, straight paint edges without laying out tape by hand

Use and tips

Lift the masks carefully off the backing, lay them on the relevant glazing parts and press them down. Cover any smaller remaining areas with a piece of masking tape or with liquid mask. Apply the paint in thin coats, so that it does not run under the edge of the mask; lift the masks off once it has dried. Do the masking of the inside according to the instructions before closing up the fuselage.

Who the set is for

For modelers building the Avro Anson Mk.I in 1:48 scale who want perfectly painted glazing frames on both sides and want to save themselves the lengthy job of masking with tape.

The set does not contain the model, paints or glue. Intended for use with a separately purchased Avro Anson Mk.I model in 1:48 scale.