D-30F6 engine exhaust nozzles for the MiG-31 in 1:48 scale are a 3D-printed resin accessory from Temp Models.
Responsibility details are not available.
A resin set of exhaust nozzles for the D-30F6 engines of a MiG-31 model in 1:48 scale from the Russian brand Temp Models. The nozzle is one of the places where a plastic kit simplifies most: it is made up of dozens of thin petals and the viewer can see into it. Printing in resin manages this structure in one piece. It is not a kit but replacement parts for a model.
The D-30F6 is a turbofan engine with an afterburner developed specifically for the MiG-31. It gave the machine long flight at high speed, which earlier equipment could not sustain, and at the same time reasonable fuel consumption on patrol. On this type the nozzles are exceptionally large and set close together, so from behind they form one of the most striking features of the whole silhouette of the aircraft.
Release the nozzles from the supports with a scalpel and level the mating edge on abrasive paper on glass. Wash the resin in lukewarm soapy water before painting. Spray the inside before you fit the nozzle to the fuselage. Build the heat discoloration up in very thin layers of transparent toning shades over a metallic base, otherwise the result looks overdone.
The set is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
