Wheels for the Su-25, 1:48 is a 3D-printed resin set of landing gear wheels for a model of the Su-25 attack aircraft in 1:48 scale, including the brakes.
Responsibility details are not available.
This 3D-printed resin set replaces both the nose wheel and the main wheels of a Su-25 model in 1:48 scale. It holds wheels with the deformation from the weight of the aircraft modeled in, the brakes and a correctly shaped nose leg fender. The set of the same name with the 3D suffix is cut for the 3D-printed landing gear legs from Temp Models.
The Su-25 is an attack aircraft for close support of ground forces, built to operate from field and barely prepared surfaces. The landing gear is therefore sturdy, with low-pressure tires and a prominent fender on the nose leg that protects the fuselage from stones and mud. The disc brakes of the main wheels are clearly visible on a parked machine. The tires tend to be dusty and clearly settled.
Wash the 3D-printed parts in warm soapy water first, to get rid of any print resin residue. Cut the print supports off with a sharp blade or a fine saw as close to the part as you can and sand the marks away with respiratory protection. Resin does not bond with polystyrene cement, so use cyanoacrylate glue. Apply a thin coat of primer before painting, otherwise the paint will not hold well on the smooth print. Fit the wheels with the weighted deformation so that the flattened area of the tire sits on the base, otherwise the model will not stand naturally.
The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
