Mr. Mark Softer

Gunze Mr. Mark Softer - decal softener

Mr. Mark Softer from Gunze (Mr. Hobby / GSI Creos) is a softening solution for waterslide decals. It softens the carrier film of the decal so that it yields and follows curved surfaces, rivets, panel lines and other surface detail. The result is a decal that looks as if it had been painted straight onto the model, with no lifted edges and no glossy silvering.

Use

• With the brush in the cap, apply a small drop to the spot where the decal is going and settle the decal in place
• Gently press out the excess solution and any air bubbles with a soft cloth or a cotton swab
• Let the solution dry and the decal will shrink and pull down onto the surface, including the recesses
• If any bubbles remain, prick the decal with a needle once it is dry and work in a drop of the solution
• Ideally combine it with the Mr. Mark Setter setting solution for better adhesion

Who it is for

For plastic modelers who want decals without silvering, settled perfectly even on uneven and curved surfaces. Suitable for aircraft, vehicles and figures.

Contains organic solvents and may attack paint, so always test it on a hidden area first. Use in a well-ventilated area, keep away from flame and out of the reach of children.