Amazing Art Flat Modeling File 100/180 is a flat sanding file with two grits: a coarser 100 side for fast stock removal and a finer 180 side for smoothing. One tool covers both stages of sanding.
Responsibility details are not available.
A flat modeling sanding file from Amazing Art with two working sides of different grit: 100 and 180. The number gives the coarseness of the abrasive, and the rule is that the lower the number, the coarser the grain and the faster the stock removal. The 100 side is therefore coarse and serves for fast leveling, while the 180 side is finer and smooths the surface. The practical advantage is obvious: you do not have to swap between two separate files, you only turn the tool over in your hand.
Sanding always runs from the coarser grit to the finer. A fine abrasive will not smooth the scratches left by a coarse grain away; those have to be sanded out, not merely painted over. If you start with the 100 side, therefore, finish the work with the 180 side, or the scratches will stay visible under the paint. Plastic also sands well wet: dampen the file and the part with water, the abrasive clogs less, the surface comes out smoother and, above all, no dust flies about. On delicate parts press lightly and rather repeat more light strokes.
For every builder of plastic models, figures and accessories, from the beginner to the experienced modeler. Sanding seams and sprue stubs is work that comes back with every kit, and the double grit makes this file a versatile tool for any workshop.
Do not breathe the sanding dust: work in a ventilated room, sand wet if you can or use a respirator. Store out of the reach of children.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
