An acrylic modeling paint from the IONIC line by AMMO of Mig Jimenez, carried under the part number IONIC-0180.
Responsibility details are not available.
This is an acrylic modeling paint from the IONIC line by AMMO of Mig Jimenez. Acrylics are today the most widespread choice among modelers: they are thinned according to the manufacturer's instructions, they dry quickly, they have only a slight odor, and the tools can be washed before the paint sets. On this item the particular shade is identified only by the part number IONIC-0180, so compare it against the manufacturer's color chart before buying.
Stir the bottle thoroughly before every use, for several minutes if need be, because the pigment settles at the bottom and unstirred paint shifts both the shade and the covering power. Apply it to a clean, degreased surface, ideally prepared with a primer. Work in thin coats and let the paint flash off between them: two light coats cover better and keep more detail than one heavy coat, which floods the engraving and the small edges.
When spraying, thin the paint in the cup of the gun rather than in the bottle, so that you do not spoil your stock. Wash the brush immediately after work, because dried acrylic is hard to get out of the bristles. Wipe the neck and the thread of the bottle, otherwise it will stop sealing in time and the paint inside will thicken. Always try the shade on a piece of scrap plastic before the model, because paint looks different once it has dried than it does in the bottle.
The paint is supplied on its own. The thinner, primer and other materials are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
