The Fine Art hand drill (0 to 0.6 mm) is a precision drilling tool for modelers that holds thin drill bits up to a diameter of 0.6 mm for drilling small holes without electricity.
Responsibility details are not available.
A precision hand drilling tool operated with the fingers. It serves for drilling very fine holes, which in modeling are needed for example for pins, wire, barrels, the attachment of details or the fitting of photo-etched parts. The range up to a diameter of 0.6 mm covers the thinnest drill bits, with which an ordinary drill would risk breaking them. Working by hand gives full control over the depth as well as the direction.
For modelers who detail kits and need precise fine holes. It will be appreciated above all by those who work with aftermarket accessories and superdetailing.
The drill bits are fragile and sharp. Drill slowly with light pressure and protect your eyes and fingers.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
