MATT LUCKY VARNISH (17 ml)

MATT LUCKY VARNISH (17 ml) — AMMO of Mig Jimenez

A clear matte acrylic varnish (water-thinnable) in a 17 ml dropper bottle. It is used to give a finished model its final matte finish. This is not a paint or a kit — the varnish is transparent, has no covering power at all, and will not change the shade underneath it; it only adjusts the surface's gloss. The manufacturer states that the varnish does not yellow and does not affect the colors underneath. It is applied with a brush or an airbrush, even straight from the bottle without thinning; it can be thinned and cleaned with acrylic thinner or water. Full curing takes about 24 hours.

Order of Work — When to Use the Matte Varnish

A matte varnish is the last layer, never the first. The usual sequence is: paint → gloss varnish under decals (decals do not silver on a gloss surface, since no air pockets form under the carrier film) → decals → washes and filters → a final varnish depending on the desired look. Choose the matte version when you want a deep, perfectly matte surface: military equipment, tanks, artillery, aircraft or figures. If the surface should only be softened and naturally silky, reach for the satin version instead — real equipment tends to be slightly satin more often than perfectly matte, so satin often looks more realistic.

Use

• A final matte topcoat on a finished model after decals, washes and filters.
• Unifying the gloss where matte and gloss paints meet.
• Matting down a gloss varnish that was applied under decals.
• Preparing a base for pigments — dust and grime hold better on a matte surface.

Application tips

Apply it in thin coats. A coat that is too thick or too wet can turn whitish and powdery (a white haze over the paint) — two thin coats with a pause between them are better than one heavy one. Shake the bottle thoroughly before use, since the flattening agent settles to the bottom. Spray with short, light passes from a distance with an airbrush, not a wet coat.

Who it is for

For modelers of military equipment, aircraft and figures who want to finish a model with a genuinely matte surface, and for anyone who needs to unify uneven gloss before applying pigments.

Safety: an acrylic, water-thinnable product — the manufacturer describes it as non-toxic and odorless. Even so, ensure good ventilation and protect your airways when airbrushing (the sprayed mist should not be inhaled). Keep out of the reach of children.