The LööK set for the Mi-8MT in 1:48 scale from the Czech manufacturer Eduard brings a finished instrument panel in color that only has to be fitted into the model.
Responsibility details are not available.
This is an accessory from the Czech manufacturer Eduard for a plastic model of the Mi-8MT transport helicopter in 1:48 scale. The LööK line is built around a finished resin instrument panel already rendered in color, so the most demanding part of the work on a cockpit falls away: painting the small dials and reading their layout out of the instructions. It is not a model or a kit but an accessory for the basic kit.
On a helicopter with a glazed cockpit the instrument panel is the first thing visible from the outside. In plastic it tends to be suggested only in shallow relief, or it is handled with a flat decal that has no depth. A finished resin part in color removes that weakness without your having to spray and clean up small areas.
Wash the resin part first in lukewarm water with a detergent, so no mold release agent is left on the surface. Cut the casting block off with a saw or a cutting disc, never snap it, and sand the surface back with respiratory protection. Try the part out dry before gluing it in and thin the plastic panel as needed, so the cockpit can still be closed. It is glued with super glue in small drops. Do not spray over the colored surface, and leave any gloss on the instrument glasses alone.
This is an accessory for a model. The base kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
