Needle For MAX-4

Needle For MAX-4: a Sparmax replacement needle

A separate spare part from the Sparmax brand for the MAX-4 airbrush. It is neither a kit nor a whole airbrush but the needle, that is the part which, together with the nozzle, decides how fine a spray the airbrush can manage. The needle and the nozzle form a matched pair, which is why spare parts are always chosen according to the particular model of airbrush.

When it is time to change the needle

• The spray scatters to the sides or the line is irregular.
• The airbrush drips or leaks even after careful cleaning.
• The tip is visibly bent, blunted or scored.
• Paint settles on the tip faster than it used to.

Advice on replacement and maintenance

• Before changing it, dismantle the airbrush according to the manufacturer's instructions and clean the parts.
• Slide the new needle in slowly and without force, so that the tip is not damaged against the nozzle.
• The needle tip must never be straightened or coarsely sanded; that destroys the fine profile for good.
• Flush the airbrush after every session; settled paint is the most common cause of premature wear.
• It is good to have a spare needle at home before you need it.

Who the part is for

For owners of the MAX-4 airbrush who want to extend its life or restore the quality of the spray without buying a new airbrush. Check that you really have this model of airbrush, because the needles of the individual models are not interchangeable.

The needle tip is very sharp, so handle it with care and store it out of the reach of children.