Mr.Paint white primer for spraying with an airbrush, which unifies the base and prepares the model for painting.
Responsibility details are not available.
A primer does two jobs on a model: it improves the adhesion of the paint and it unifies a surface made up of different materials and differently colored parts. The white version adds a third advantage to that, namely a light base under bright shades. Yellow, red and orange lose their strength on a gray or dark base and have to be laid on in heavy coats; on a white base they cover sooner and stay fresh.
A single even coat of primer reveals what is not visible on multicolored plastic: joints that are not fully sanded, scratches from sandpaper and remains of filler. That is exactly why the primer goes on before you start dealing with the color scheme. Repair the faults you find, sand the spot again and renew the primer on the repaired section, so that the whole model has the same base.
Wash and degrease the model before spraying, because not even primer holds on a greasy surface. Stir the contents of the bottle and spray with an airbrush in thin coats. The aim is a film that covers but is as thin as possible, one that does not flood the engraved detail and the fine surface detail. Let the primer dry properly and polish out any unevenness with a fine abrasive. Flush the airbrush out as soon as you finish the work.
The package holds the primer. The thinner, the airbrush and other modeling aids are not included, unless stated otherwise. Spray in a well-ventilated area, use respiratory protection and store the bottle well closed and out of the reach of children.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
