A plank 1.1x2.3 mm in white polystyrene, from the range that copies the dimensions of real lumber. Suitable for floors, walkways, joists and wall boarding.
Responsibility details are not available.
A plank twice as wide as it is thick is the most common shape you will meet on a real building. The ratio of 1.1 to 2.3 corresponds to four by eight inch lumber reduced to the size usual on a layout. That is exactly why a structure built from it looks natural: the size did not arise by chance but copies a real carpenter's measure.
It finds a use as the floorboard of a warehouse, the board of a walkway, a joist under the roof of a shed, the timbering of a ramp or the boarding of a barn wall. Set on edge it handles the role of a thin joist, laid flat it makes floors. Two pieces glued into a T shape make a beam with a flange, three put together a framed door surround. In military scenes it suits trench revetment and bunker hatches.
A floor looks better when the boards are not laid tight together but with a hairline gap set by a strip of paper. The gaps are then brought out by shading and the surface gains depth. It is a good idea to stagger the ends of adjacent rows so that the joints do not run in one line. Before painting it is worth roughening the surface lightly, because a smooth face looks far too perfect for wood.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
