Single riveting rows (rivet size 0.10 mm, gap 0.4 mm, suits 1/72 scale), White color, total length 6.7 m/22 ft

Quinta Studio riveting rows 0.10 mm, white (1:72)

A set of 3D decals from Quinta Studio with fine relief (positive) rivets arranged in rows. It is neither paint nor a classic wet decal but a thin carrier film with raised rivets that goes straight onto the surface of the model. The rivet size of 0.10 mm and the gap of 0.4 mm correspond to 1:72 scale. The total length of the rows is roughly 6.7 meters, and the white color makes them easier to position on darker areas.

Use

• Clean and degrease the area where the rivets are to go
• Cut off the length of row you need and transfer it to the model
• Use the rivets to restore detail rubbed away by sanding or to add missing rows
• Once dry they can be sprayed over with paint and varnish

Who the set is for

The accessory will be appreciated by modelers who want to raise the realism of a surface and to restore rivet rows accurately without laborious embossing. Suitable for aircraft and other machines in the chosen scale.

This is neither a kit nor paint. The set serves as a surface detailing accessory.