A set of six precision Phillips screwdrivers for modeling and fine mechanical work. Sizes from the smallest 0000 up to size 1.
Responsibility details are not available.
The screws in models, in RC equipment, in electronics and in watches tend to be so small that an ordinary screwdriver from the workshop crushes their heads before they come undone. This set holds six Phillips screwdrivers in the fine sizes in which such joints actually occur, and so it deals with the most common source of damaged screws and scuffed parts.
The set holds six pieces in these sizes and shaft lengths:
The handle is 100 mm long and has a diameter of 17 mm, so it is held well in the whole palm as well as in the fingertips.
Always choose the screwdriver that seats in the head of the screw to the full depth of the cross recess; a smaller size breaks the recess out and a larger one does not seat in it. When undoing a screw, press in the direction of its axis and only then turn, otherwise the tip jumps out of the recess. Keep the tips clean and dry, because a trace of oil on the tip will let the tool slip in the recess. Store the screwdrivers separately so that the tips do not knock against each other, and do not use them as a pry bar or a scribing tool, which a fine tip will not stand. A longer shaft suits deep holes, a shorter one holds its direction better and will take more force.
The set suits the building and maintenance of models, RC equipment, small electronics and fine repairs at home. Flat or hex screwdrivers, a bit holder and a case are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
