1:144 Mig-21 SMT (Eduard)

Brengun 1:144 MiG-21 SMT is a photo-etched detail set, an accessory to a plastic kit you have already bought rather than an aircraft model. The metal parts replace and add the detail that injected plastic cannot deliver in this scale. Intended for the Eduard kit.

Scale1:144
Manufacturer Brengun
Product EAN8591111776226

Responsibility details are not available.

7.20 €
5.95 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Brengun 1:144 MiG-21 SMT photo-etched set

This item is not a kit. It is an accessory photo-etched set from the Czech maker Brengun, who has long specialized in aftermarket accessories for small scales. The fret holds parts etched from thin metal sheet that are fitted to the Eduard plastic MiG-21 SMT model. The model itself, glue and paints are not included in the package.

The real subject

The MiG-21 SMT is one of the late versions of the Soviet single-engine supersonic fighter from the turn of the 1960s and 1970s. At first glance it differs from the older versions in its greatly enlarged dorsal hump, which housed an additional fuel tank. That silhouette is exactly what makes the SMT an easily recognizable piece in a collection.

Why photo-etched parts instead of plastic

A MiG-21 model measures roughly ten centimeters in 1:144 scale. Injected plastic has physical limits: it cannot manage sharp thin edges, fine grilles or flat pressings, because a mold has to keep a certain minimum wall thickness. Etched sheet runs in tenths of a millimeter, so parts made from it match the scaled thickness of real sheet metal and look natural even from close up.

Tips for working it

Do not break the parts out of the fret; cut them off with a sharp scalpel on a hard surface, ideally glass or metal. Level the remains of the tab with a fine file or a sanding sponge. Degrease the whole fret with alcohol before you start and do not touch it with bare fingers afterwards. Make the bends in a modeling bending tool or between two razor blades, place small parts with tweezers and bond them with super glue applied on the tip of a pin. Paint does not hold on metal on its own, so use a primer and only then the covering shade.

Who the set is for

  • modelers who build in 1:144 scale and want to push the level of detail
  • collectors of modern jet equipment in small scales
  • more experienced builders with the basic kit of tools for photo-etched parts
  • adding to a model under construction where the plastic parts are not enough

The set is an accessory to a plastic kit, which it does not include. The parts are supplied unpainted; glue, paints and the model itself are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is an accessory photo-etched set for a plastic kit, which has to be bought separately.

For the Eduard plastic MiG-21 SMT model in 1:144 scale. The parts may not fit other kits without modification.

A sharp scalpel, a hard cutting surface, pointed tweezers, a fine file and super glue. A bending tool makes the work much easier, but two razor blades can stand in for it.

Yes. Metal is smooth and non-absorbent, and paint holds on it poorly without a primer coat. Degrease the parts with alcohol before priming.

Last seen

BrengunBRL1440421:144

1:144 Mig-21 SMT (Eduard)

Brengun 1:144 MiG-21 SMT is a photo-etched detail set, an accessory to a plastic kit you have already bought rather than an aircraft model. The metal parts replace and add the detail that injected plastic cannot deliver in this scale. Intended for the Eduard kit.
In stock
7.20 €
1:48 de Havilland Chipmunk T.10 TFace-25 %Stock ClearanceFavorite
EduardEX8101:48

1:48 de Havilland Chipmunk T.10 TFace

1:48 de Havilland Chipmunk T.10 TFace is an Eduard masking set in the TFace form, that is for covering the glazing from the inside as well as the outside. Intended for a model of the trainer aircraft in 1:48 scale.
Last one!
10.40 €7.80 € You save 2.60 €
PANZER ARTRE35-0201:35

1:35 JSU 122/152 Mantlet with canvas cover

A gun mantlet with a canvas cover for the ISU-122/152 1:35 from PANZER ART: a resin accessory with a covered gun mantlet for the Soviet self-propelled guns. It is an accessory, not a model.
In stock
7.16 €
EduardED4915641:48

1:48 Douglas A-4C Skyhawk - PE Set for HobbyBoss

A set of photo-etched parts in 1:48 scale for the Douglas A-4C Skyhawk model from HobbyBoss. It adds the details that cannot be molded in plastic at the right thickness.
In stock
20.80 €
HatakaHTK-AS56

Modern Portuguese AF paint set vol. 1

Eight tones for the Portuguese Air Force from the fifties to the end of the colonial wars. It holds the aluminum finish of the trainers and early jets, the air defense grays, the striking blue markings and a whole camouflage of German origin.
In stock
16.76 €
AberABR351031:35

1:35 German tank transporter Sd.Ah.116 - vol. 2 - additional set

The German Sd.Ah.116 tank transporter in 1:35 - photo-etched set, part 2 (add-on) is a photo-etched detail set from Aber. It is not a trailer kit but a metal accessory.
In stock
17 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.