SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here

1:32 Panavia Tornado GR.4

The 1:32 photo-etched set for the Panavia Tornado GR.4 contains fine metal parts for detailing a model of the combat aircraft. It is not a kit but an accessory for a model already bought.

Scale1:32
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

14.44 € 10.84 €
8.96 € without VAT
−25 % You save 3.60 €
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched set for the Panavia Tornado GR.4 in 1:32 (Eduard)

A photo-etched set for a model of the Panavia Tornado GR.4 combat aircraft in 1:32 from the Czech manufacturer Eduard. The package does not contain a model, only a fret of fine metal parts with which the plastic parts of a kit are replaced or supplemented. Etched metal is a few tenths of a millimeter thick, so it captures the thickness of real sheet-metal panels, consoles and grilles better than injection-molded plastic does. The name of the set does not say which part of the model the parts cover, so we recommend checking the extent before buying; Eduard offers several sets of different scope for the same aircraft in the same scale.

The real subject

The Panavia Tornado GR.4 was the British strike variant of the two-seat combat aircraft with a variable-geometry wing, created in collaboration between European manufacturers. The GR.4 form came about by upgrading the earlier GR.1 standard and concerned above all the avionics, the navigation and targeting systems and the integration of new armament. The external hallmarks of the type remain the wing with a variable sweep angle, the tandem two-seat cockpit and the substantial thrust reverser buckets on the engine nacelles.

Building tips

Separate the parts with a sharp scalpel on a hard surface, so that they are not bent. Make the folds along the scored lines, ideally in a bending tool or between two razor blades. Bond with cyanoacrylate glue in a minimal amount, applied with a pin or a wire. The plastic parts that the etched metal replaces have to be sanded away completely in advance, otherwise the overall thickness increases and the assembly goes out of true. Degrease bare metal before painting and spray it with a primer. Dry-fit as you go, as a number of etched parts can no longer be corrected once the fuselage is closed.

Who the set is for

  • Builders of the Tornado GR.4 model in 1:32
  • Modelers who want to add fine metal detail to a model
  • More experienced builders used to working with photo-etched parts
  • Collectors who build a model to competition quality

The accessory is supplied unassembled. The kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. The package contains only photo-etched metal parts. The Tornado kit in 1:32 has to be bought separately.

The name of this item does not state the extent, whereas the set marked interior is aimed at the cockpit. Check the particular contents of both sets against the illustration and the manufacturer's data before buying.

Photo-etched sets are designed for a particular kit. That detail is not stated here; check against the instructions from the manufacturer that the set matches your model.

With cyanoacrylate glue applied in a minimal amount with a pin or a wire. Ordinary cement for plastic will not bond metal, because it works by melting the material.

Last seen

1:32 Panavia Tornado GR.4-25 %Stock ClearanceFavorite
EduardED332741:32

1:32 Panavia Tornado GR.4

The 1:32 photo-etched set for the Panavia Tornado GR.4 contains fine metal parts for detailing a model of the combat aircraft. It is not a kit but an accessory for a model already bought.
2 leftof 3
14.44 €10.84 € You save 3.60 €
TamiyaTA126571:12

1:12 Ducati 1199 Panigale S - Front Fork Set

Ducati 1199 Panigale S front fork set is a detail accessory (Front Fork Set) in 1:12 scale from Tamiya. It is NOT a standalone model: it serves to upgrade the corresponding motorcycle model.
In stock
23.16 €
AML DecalsAMLE800061:72

1:72 Universal perforated inside rim (PE set)

Universal photo-etched perforated inner wheel rims 1:72 from the Czech manufacturer AML — a photo-etched set for refining the main wheels of aircraft models.
In stock
5.16 €
U-STARUA90940

Metal Universal Handle Spray Pen

An additional metal grip for an airbrush moves the support from the fingers into the palm, so the hand does not tire so much during a longer spraying session and the stroke stays steady.
In stock
37.56 €
AiresAIR46681:48

1:48 YAK-3 control surfaces

Aires 1:48 Yak-3 control surfaces is a resin set of control surfaces. It is not a model of the aircraft but a detail accessory that replaces the ailerons, elevator and rudder on a 1:48 kit of the Yak-3 fighter.
In stock
8 €
EduardEX5761:48

1:48 Harrier T.2/ T.4/ T.8

Eduard 1:48 Harrier T.2/T.4/T.8 is a die-cut self-adhesive masking set for cleanly spraying the canopy framing on a model of the British two-seat Harrier trainer.
In stock
10.40 €
EduardEDD480751:48

1:48 Sukhoi Su-27UB stencils

Sukhoi Su-27UB stencils is a set of decals with technical lettering for models of the Sukhoi Su-27UB in 1:48 scale from the maker Eduard.
In stock
9 €
AMMO of Mig JimenezATOM-20934

ATOM Cold War Soviet Fighter-Bombers Vol 2 Set

AMMO ATOM Cold War Soviet Fighter-Bombers Vol. 2 is a set of six water-thinnable acrylic paints for the camouflage of Soviet Cold War fighter-bombers.
In stock
17.96 €
New WareNWAM07471:72

1:72 C-47A Skytrain Basickabuki masks

New Ware kabuki spray masks for Douglas C-47A Skytrain models in 1:72 scale, the Basic edition for clean glazing frames.
In stock
5.56 €
BSC. No49 PURPLE BROWN-25 %Stock ClearanceFavorite
AK interactiveAK4036

BSC. No49 PURPLE BROWN

AK interactive BSC. No49 Purple Brown is a water-based modeling acrylic paint in a bottle of 17 ml. A dark brown with a purple cast from the British color standard.
6 left
3 €2.24 € You save 0.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.