1:35 BT-7 - Zvezda

BT-7 wheel masks in 1:35 scale from Quickwheel for the clean separation of the rubber tire from the disk on the road wheels of the kit from Zvezda.

Scale1:35
Manufacturer Quickwheel
Product EAN8591111000000

Responsibility details are not available.

9.56 €
7.90 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The BT-7 in 1:35 scale – a wheel masking set (Quickwheel)

A masking accessory for painting road wheels, not a kit. The set gives the boundary between the rubber tire and the disk a ready-made shape, so you do not have to cut rings nor draw around with a brush.

Which kit it is intended for

The set is cut for the wheels of the BT-7 kit from Zvezda. We point that out expressly, because a mask of the same vehicle for the kit of another brand exists as well – both sets are named the same and differ exactly only in the target kit. On a vehicle with large road wheels the diameter plays an especially great role, so a mix-up is noticed at once.

The order relative to the base coat

A mask must not go onto a bare nor onto a freshly sprayed surface. The right order is: clean and degrease the part, lay down a thin base coat, let it cure fully, spray the first of the two colors and let it cure again. Only onto a surface dried this way is the mask put in place.

The reason is twofold. On bare glossy plastic paint holds much worse than on primer and when the mask is peeled it comes away in whole islands. And on insufficiently dried paint a mask leaves an imprint of the margin or takes the finish with it. Curing moreover does not mean that the paint is not tacky to the touch – with most paints it is sensible to wait longer than necessary, especially when masking across the whole perimeter of a wheel. It also helps when the base under the mask is rather smooth than roughened: on a smooth surface the margin of a mask seats more tightly and the edge comes out sharper. Heavily matte paints with a coarse pigment therefore work worse under a mask; if you are painting with them, seal the surface with a thin layer of clear and mask only over that.

Who the set is for

  • Modelers who work with a base coat and an airbrush
  • Builders of vehicles with large, clearly visible wheels
  • Anyone who wants the edge of the rubber the same around the whole perimeter
  • Competition and display case models

It is a masking accessory for modelers. The package holds neither a kit, wheels nor paints. Store the sheet flat and out of direct sunlight.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

This variant is cut for the wheels of the kit from Zvezda. For a kit of another brand a separate set with the same name exists – when ordering, therefore, note exactly the manufacturer of the kit stated.

We do not recommend it. Paint on bare glossy plastic holds substantially worse and when peeled it comes away in islands. Lay down a thin base coat first and let it cure.

Until the surface is not merely dry to the touch but truly cured. With masking across the whole perimeter of a wheel it pays to wait longer than strictly necessary.

Worse. A coarse matte surface will not let the margin of a mask seat tightly. Seal it with a thin layer of clear and mask only over that.

Last seen

QuickwheelQW-0511:35

1:35 BT-7 - Zvezda

BT-7 wheel masks in 1:35 scale from Quickwheel for the clean separation of the rubber tire from the disk on the road wheels of the kit from Zvezda.
In stock
9.56 €
1:48 FM-1 Wildcat ADVANCED-25 %Stock ClearanceFavorite
EduardSIN6481231:48

1:48 FM-1 Wildcat ADVANCED

An accessory set in 1:48 scale for a model of the carrier-based fighter FM-1 Wildcat, in the form that carries the designation ADVANCED.
6 left
62 €46.52 € You save 15.48 €
TamiyaTA85018

TS-18 Metallic Red 100ml

The spray paint Tamiya TS-18 Metallic Red (100 ml) - a synthetic lacquer in metallic red for plastic models; it dries quickly and covers well.
In stock
7.16 €
EduardED4914711:48

1:48 Morane-Saulnier MS.406C1

A fuller photo-etched set of the Eduard brand for a model of the French fighter Morane-Saulnier MS.406C1 in 1:48 scale.
In stock
19.80 €
Aires/QuickboostQB722561:72

1:72 Bf-109G/K stabilizer

A resin replacement horizontal tail surface (stabilizer) for the Bf 109G/K in 1:72 scale from Aires/Quickboost. An accurate casting for refining the tail of a model.
In stock
3.56 €
1:32 McDonnell F-15E Strike Eagle interior-25 %Stock ClearanceFavorite
EduardED329471:32

1:32 McDonnell F-15E Strike Eagle interior

A set of photo-etched metal parts for the interior of a model of the F-15E Strike Eagle in 1:32 scale.
Last one!of 2
27 €20.24 € You save 6.76 €
1:48 Lockheed-Martin F-35A stencils-25 %Stock ClearanceFavorite
EduardEDD481141:48

1:48 Lockheed-Martin F-35A stencils

1:48 Lockheed-Martin F-35A stencils is a set of Eduard decals with technical stencils and service pictograms for a model of the F-35A in 1:48 scale.
5 leftof 9
6.80 €5.12 € You save 1.68 €
RX-Zeromaru Sinkikessho-25 %Stock ClearanceFavorite
BandaiBAN55707

RX-Zeromaru Sinkikessho

RX-Zeromaru Sinkikessho is a plastic kit of a robot character from the world of SD Gundam from the Japanese maker Bandai.
Last one!of 2
25.56 €19.16 € You save 6.40 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.